Garment Carrying Rails
With or Without Hanger Trap Bar
Zinc Plated Steel
Garment Carrying Rails
With or Without Hanger Trap Bar
Zinc Plated Steel
Overview:
- Designed to carry garments on standard clothing hangers
- All rails are manufactured to required lengths
- All garment rails can be supplied with or without the hanger trap bar, The trap bar is a useful addition for the security of lighter garments to prevent any dislodgement of the product in transit
When ordering the following information is required:
- Type of load restraint track or honeycombe panel
- Track to track or panel to panel measurements
- With or without hanger trap bar
- Optional: When required to fit CARG1806/3050/ZP track, a pin can be added to fit into the notch at 11 o'clock to stop the pole rotating
X-CARG/GARM - TRACK
| wgt. |
To Suit Most Load Restraint Tracks, Commonly Used With CARG1806 Track
- When required to fit CARG1806/3050/ZP track a pin can be added to fit into the notch at 11 o'clock to stop the pole rotating
- ø33.7mm Outside diameter
- 4mm Heavy duty steel
- Bright zinc plated finish
- Can be supplied with or without hanger trap bar
Add To Quote
X-CARG/GARM - PANEL
| wgt. |
To Suit Garment Rail 'Honeycomb' Panels
- Rail is held securely in place (will not rotate) by the unique plastic end fittings
- ø33.7mm Outside diameter
- 4mm Heavy duty steel
- Bright zinc plated finish
- Can be supplied with or without hanger trap bar
Add To Quote
Added To Your Quote
-
Garment Carrying Rails
With or Without Hanger Trap Bar
Zinc Plated Steel
Quantity: